Re: Should I sell My Roto Vac 360i

by Mo Wed Apr 15, 2015 12:16 pm

I tries the Mytee RE and the 360i at ICE definitely preferred the 360i. It was lighter less bulky couldn't tell you about water recovery

by milspec6 Wed Apr 15, 2015 12:58 pm

I like the Rx-20 and Hoss, but they have a larger head. Just seems lika a 360i would pull more with the smaller head instead of the glided vac ports.

Anyone know if it does?

by Andy Mc Thu Apr 16, 2015 5:16 am

SO Matt, Here's my "buy it now price" $950 and a jar if grease eraser from jon don,

Or take your chances and hope mispec don't bid this thing up to $4500.00

by Mo Thu Apr 16, 2015 7:02 am

Matt is going to end up scoring on this 360i no better deal on one anywhere. If I didn't need to replace my heater and fix my Orbot I would have jumped on this deal

If I were you Rob I would buy the 360i and sell one of those RE you have in the shed. I spend very freely when I'm not writing the checks Very Happy

by Andy Mc Thu Apr 16, 2015 1:34 pm

You guys are going to HATE me!! Just got back from a job, killed me trying to get it clean, had to pull out the roto vac to finish the living room and famly room, what a life saver.

No way I can sell it. Truthfully it only comes in handy 1 or 2 jobs per month , but that alone is with keeping it.

SORRY guys!! I fell like a piece of crap. I thought for sure I could do with out it, but I realize it's just to handy to give it up. If I sold it I would for sure end up buying another one and that would suck .

by Andy Mc Thu Apr 16, 2015 1:36 pm

Matt , I give you permission to slap me next time your in town.

by Pro Touch Thu Apr 16, 2015 1:45 pm

You made the right decision Andy. There's no way I could live without mine.

by Mo Thu Apr 16, 2015 2:33 pm

Andy Mc wrote:You guys are going to HATE me!! Just got back from a job, killed me trying to get it clean, had to pull out the roto vac to finish the living room and famly room, what a life saver.

No way I can sell it. Truthfully it only comes in handy 1 or 2 jobs per month , but that alone is with keeping it.

SORRY guys!! I fell like a piece of crap. I thought for sure I could do with out it, but I realize it's just to handy to give it up. If I sold it I would for sure end up buying another one and that would suck .

If only that job didn't come up Matt would have owned that puppy laughing

by Mo Thu Apr 16, 2015 2:34 pm

Andy Mc wrote:Matt , I give you permission to slap me next time your in town.

Lets just do it now slaping

by ACpower1 Thu Apr 16, 2015 3:30 pm

probably the right choice, I pull that thing out at the end of a long day when you have that last empty house.

you know either way your going home after traffic so you might as well grab a coffee and relax with the 360.

by milspec6 Thu Apr 16, 2015 4:31 pm

Good decision, I hold onto my Rx-20 for the same reason. I think I have used it twice in 6 months, but it was the only tool that could get the job done when it was needed.

Now invest in a small shed. wink

by Devon07 Thu Apr 16, 2015 5:53 pm

Guess I was wrong. lol

Now invest in a small shed....better get the bigger shed, you just started a bad habit. Wink

by milspec6 Thu Apr 16, 2015 6:45 pm

Devon07 wrote:Guess I was wrong. lol

Now invest in a small shed....better get the bigger shed, you just started a bad habit.

Filled a 3-car garage with loft already Cool

by Andy Mc Fri Apr 17, 2015 7:24 am

Thank you for the over the web slap MO, I feel better now. Yep, if that job had not come along I would have sold it to Matt, The job reminded me why I carry the dang thing.

It sucks trying to be good at this job, sometimes I wish I didn't care,

then all I would have is a wand and some dry slury,

no vac, no pre spray, no spotting, no VLM ing , no rotovacing, no pre scrubbing, no specialty chems, etc

Life would be so much easier just hooking up the wand and go, or just going back to VLM only . But I can't be happy with being happy

by milspec6 Fri Apr 17, 2015 12:58 pm

Andy Mc wrote:Thank you for the over the web slap MO, I feel better now. Yep, if that job had not come along I would have sold it to Matt, The job reminded me why I carry the dang thing.

It sucks trying to be good at this job, sometimes I wish I didn't care,

then all I would have is a wand and some dry slury,

no vac, no pre spray, no spotting, no VLM ing , no rotovacing, no pre scrubbing, no specialty chems, etc

Life would be so much easier just hooking up the wand and go, or just going back to VLM only . But I can't be happy with being happy

I could not agree more brother.

by Devon07 Fri Apr 17, 2015 5:44 pm

Milspec....I know a guy like you....he owns everything....once I had a part go bad on my machine....years ago (an impeller) he had one in his garage....finding it was the hard part......Fedex would have been quicker. Wink

The ole guy had old school talent too. made it worth it.

by milspec6 Fri Apr 17, 2015 5:49 pm

Sounds right....anyone need a limited edition dash knob from a '69 Jeep or the old distributor off a '55 Merc?

Just don't ask which box it is in. It can be a real adventure going though the loft in the garage some days, often find things I never new were there.

by Devon07 Fri Apr 17, 2015 5:51 pm

Thats why I dont do it....I re-buy then find the darn thing later.

by Matt; My carpet cleaner Fri Apr 17, 2015 8:48 pm

Oh crap.

by Devon07 Sat Apr 18, 2015 5:30 am

I think Matt just remembered where something is.

by Mo Sat Apr 18, 2015 1:41 pm

Yo Matt I know a distributor maybe be getting a trade in real soon he sais it was in mint condition. Ill PM you once I know he has it.

by milspec6 Sat Apr 18, 2015 2:21 pm

Mo wrote:Yo Matt I know a distributor maybe be getting a trade in real soon he sais it was in mint condition. Ill PM you once I know he has it.

That just means that it turned green from the chemicals Very Happy

by Mo Sat Apr 18, 2015 5:30 pm

I'll believe it when I see it

by Matt; My carpet cleaner Sat Apr 18, 2015 10:19 pm

Andy Mc wrote:Matt , I give you permission to slap me next time your in town.

I'll just pee in your 5 gal chem jug. Wink

by Sponsored content