Re: Loaner Review Wand-eeze Carpet Cleaning Wand Kit

by Royal Man Wed Jul 22, 2015 9:58 am

Ken hasn't even posted his set up to see if it is installed correctly or used correctly. That would be a good start. Post some pics and/or video for tips.

by Royal Man Wed Jul 22, 2015 10:00 am

Seemd most users are not even installing or using it properly.

by Mo Wed Jul 22, 2015 10:30 am

Maybe you should call the participants Dave. Rob is next I believe he is in the same state maybe you two should meet.

by milspec6 Wed Jul 22, 2015 12:20 pm

Mo wrote:Maybe you should call the participants Dave. Rob is next I believe he is in the same state maybe you two should meet.

That was my plan from the start Mo. I'm a slow learner and want to start out on the right foot with this thing.

I have been watching he other posts closely....

by Davey Cracker Wed Jul 22, 2015 1:04 pm

I followed the instructions on his video, it's not rocket science. Except for using those "leader hoses"..........I feel the same way as Tom about those, total PITA. Very Happy

by Royal Man Wed Jul 22, 2015 2:52 pm

The 1ft leader saves the weight and expence of brass fitting. Plus they are flexable and will go on either side of the tube for left or right hand cleaning. You see ive been using the wand-eeze for 5 years and i have already figured out the best way s to use it.

by Ken Raddon Wed Jul 22, 2015 3:20 pm

Dont even want to put it on. Who's next on the list?

by Davey Cracker Wed Jul 22, 2015 3:33 pm

Ken Raddon wrote:Dont even want to put it on. Who's next on the list?

Why is that, care to say?

by milspec6 Wed Jul 22, 2015 3:33 pm

I think Devon is next on the list.

by Davey Cracker Wed Jul 22, 2015 3:45 pm

Royal Man wrote:The 1ft leader saves the weight

Doesn't make sense to my pee brain, can you explain how it would do that?

Common sense tells me it would feel like the same weight. But not enough to worry about, couple of ounces at most, and not enough to off-set the pounds added, then to not have the convenience of connections at wand and the hoses always attached to it.

Not everyone is going to see or like it the same way.

by Mo Wed Jul 22, 2015 4:30 pm

Ken Raddon wrote:Dont even want to put it on. Who's next on the list?

At least you looked at it Very Happy

Rob you're next PM Ken your addy.

by Mo Thu Jul 23, 2015 2:55 pm

milspec6 wrote:
Mo wrote:Maybe you should call the participants Dave. Rob is next I believe he is in the same state maybe you two should meet.

That was my plan from the start Mo. I'm a slow learner and want to start out on the right foot with this thing.

I have been watching he other posts closely....

Dave you have someone that wants to meet with you in person so that you can make sure he is using it correctly and you don,t respond. I don.'t get it

by Royal Man Thu Jul 23, 2015 3:31 pm

I thought I responded. Rob can meet me at a job if it's convenient. I don't know how far away he is? Sure come on over!

by Mo Thu Jul 23, 2015 4:29 pm

Sweet first beer is on me. I would like to see Robs shuffle board stroke on video Very Happy

by milspec6 Thu Jul 23, 2015 4:31 pm

Mo wrote:Sweet first beer is on me. I would like to see Robs shuffle board stroke on video

There will be video....hopefully while on the large commercials next week.

by Royal Man Thu Jul 30, 2015 5:43 am

So how is the ergo grip working out?

by milspec6 Thu Jul 30, 2015 6:13 am

Nothing delivered yet, but I did have another question for you Royal.

How well do the grip valves hold up compared to a Wespak angle valve? Heat rating and PSi?

If they surpass the angle valves, you have another selling point right there that hasn't been presented yet. I was just thinking about that after replacing a valve last night.

by Royal Man Thu Jul 30, 2015 5:31 pm

They hold up well and rebuild kits are less expensive.

by milspec6 Thu Jul 30, 2015 7:30 pm

Royal Man wrote:They hold up well and rebuild kits are less expensive.

Bingo, there you go.

by Davey Cracker Thu Jul 30, 2015 8:29 pm

I use a similar gun for my inline sprayer (an Italian brand), and have only had to replace it once in 20+ years..........I didn't even bother rebuilding it after that long, just replaced it.

by Royal Man Mon Aug 03, 2015 4:25 pm

So, did the wand-eze ever show up?? Any probs with set up i'm here to help.

by milspec6 Mon Aug 03, 2015 5:43 pm

Nothing as of last night, but I didn't get to the post office today if that is how it was coming.

Basically, still waiting which kind of sucks as there are 2 large jobs on the schedule this week that I wanted to test it out on. Still a couple of days, so who knows.

by Mo Mon Aug 03, 2015 6:28 pm

Ken did you send it USPS or FedEx

by Royal Man Thu Aug 06, 2015 5:07 pm

It's been quite a while. Did Ken have tracking on that package? If lost he can send me the $100 insurance as a partial payment. And Do I need to Mail a new wand-eeze to Milspec6?

by Davey Cracker Thu Aug 06, 2015 5:31 pm

SO it got lost?

by Sponsored content