Who Dual wands?

Some one send Bob a CFM meter.

Hey Bob is your primary waste 30 gallons and that then dumps into a larger waste tank?

Mo wrote:Some one send Bob a CFM meter.

Mo,

Don't need a CFM meter, because I know what the CFM is - 390. With this setup, when you split the vacuum into 2 separate hoses, the CFM is NOT cut in half, like so many cleaners think. It is the same going into both hoses, and performs the same as a single hose setup over distance.

I guarantee you you can suck the skin off your hand at 200' + 200', for a total of 400' going into 2 wands. We have cleaned with this TM at over 400', and still get great suction and airflow.

I've nothing to gain here, as I don't make or sell any of this equipment. The reason I quit making the heaters is - I am also getting old, too old to manufacture and still clean. I turned 70 this year, and am thinking of retiring in a few.

There is no other heater on the market like this one (220,000 BTU and UP) - no pilot to light, it's automatic. Simply turn the switch on, and the heater (LP) is ready to run when you key the wand. Once you key the wand, the afterburner circuit keeps the heat so even with no spikes, as the thermo sensor is located in one of the coil pancakes for a true heat sensing. No black water, no problem - clean white couches, clean trasthed carpet, melt candle wax and chewing gum with ease.

I'm old, I need all the help I can get.

Mo wrote:Hey Bob is your primary waste 30 gallons and that then dumps into a larger waste tank?

65 gallon waste tank, pumps out at 25 gallons into the yard thru a garden hose, and then the APO turns off and waits for the next 25..

Never have to stop at any time during the day to dump the waste tank.

Interesting I may just over drive my TNT just to get more suction.

Have you rebuilt your body recently to have it clean into your 70's

Mo wrote:Interesting I may just over drive my TNT just to get more suction.

Have you rebuilt your body recently to have it clean into your 70's

Wish I could. I do enjoy that hot tub every morning before I go do battle with the dirt in the carpets.

Ahha that's the secret loosen up the joints get the blood flowing. Im buying one but you would think it would be best at the end of the day.

I've thought about over-driving my blower to run at the max 3600 rpm while the eng. maintains 3000rpm, but with it being a direct coupled setup, there's not an easy way to do it. With a belt driven blower, you can just change pulley size for a different ratio.

Will changing the size of the coupler over drive a blower

No. It's still direct drive 1:1.