Re: Steam action.

by Davey Cracker Sat May 09, 2015 12:10 am

dp1 wrote:I only have been doing this for 12 years and I had used smaller units with smaller blower, their heat sucks without any mods and the jobs with dirty carpets most likely will get brown and needs to be re cleaned, with bigger machine and blower, those issues are eliminated, everyone knows come backs are expensive, is it more expensive than TM parts ? I don't know, depends on how many come backs you have right ?

I've noticed most of those can be prevented with encap........and if not easily corrected with encap, rather than setting up again and re-cleaning, usually creating the same prob by adding more moisture which causes the wicking.

by Pablo Sat May 09, 2015 9:48 am

SCCC what is a heat booster ???? I run a PC Legend with 5 jet wand with #10 flow and I would like to know how you can get 205-210 atw. My number atw is 160 and I have a thermometer on it.
On the other side if you are running as solo operator HWE only all they long for RESI and COMMERCIAL a bigger truck is more efficient, at least you can achieve the same results in less time and when you are a one man operator avoid some steps saves a lot of work.

by dp1 Sun May 10, 2015 9:25 am

Pablo, I haven't found SCCC's thread about his heat booster, but here's a link to a thread of heat increase idea :

https://thecleanerslounge.forumotion.com/t1147-increased-my-heat-and-lower-my-kero-bill

by dp1 Sun May 10, 2015 9:27 am

Oh, here it is :

https://thecleanerslounge.forumotion.com/t1773-heat-booster?highlight=heat+booster

by Pablo Sun May 10, 2015 9:58 pm

Thanks dp1, very interesting.

by Sponsored content