Zipper Wand Floater/Loaner

Here's the link Dustin Cleantech worked up for the Canadian Float:

https://maps.google.ca/maps?saddr=Winnipeg,+MB&daddr=Regina,+SK+to:Pilot+Butte,+SK+to:Saskatoon,+SK+to:Calgary,+AB+to:Vancouver,+BC&hl=en&ll=50.903033,-107.53418&spn=8.441374,21.51123&sll=50.958427,-102.634277&sspn=4.214529,10.755615&geocode=Fepo-QIdqsw1-ikRKxr5-3PqUjFkyrnG-hoqKw%3BFcLgAQMdNdTD-SnrPaX7QB4cUzGxVHu3ljJKNQ%3BFehDAgMdmrLG-Sm57VLrSyccUzGAnAe_-At1SQ%3BFeKBGwMdmK-k-Skrme1Hv_YEUzGQJneVMp4EBQ%3BFc3jCgMdi5wz-SnVP4SfA3BxUzE6tlK2sTttJg%3BFaqq7wIdOW6p-CmzT6lD8XOGVDGL84Gb6paRuw&oq=vanvouver+&mra=ls&t=m&z=6

Shout out if you are along this path and want in on it.

OOooooo, Erik builds crates the way has makes Zippers! Quality stuff.

Yes, I'm excited...........can't wait to try it out!  

Thats awesome. What is the recommended time to use before sending it on?

Thanks Joe and Eric.

Recommended time ?
Good Question.
Wish we could time it where each of you get it for your next big job.
Some US are starting to let me know about theirs so that will be a factor in setting up the course and the timing. You Canadians are so few & far between, it's gonna be hard. You could use it about anytime, on one of the big vacants to clean, right Bill?

The Zipper really shines on commercial carpets. So if you have a commercial job coming up that's the time to demo it.

I have a few thousand feet of a convention hall lobby that I am waiting for the zipper (as long as its done before the end of the year) and then some vacant residential as well. A week seems reasonable.

I think 1-2 wks would be nice.

Joe Bristor wrote:Here's the link Dustin Cleantech worked up for the Canadian Float:

https://maps.google.ca/maps?saddr=Winnipeg,+MB&daddr=Regina,+SK+to:Pilot+Butte,+SK+to:Saskatoon,+SK+to:Calgary,+AB+to:Vancouver,+BC&hl=en&ll=50.903033,-107.53418&spn=8.441374,21.51123&sll=50.958427,-102.634277&sspn=4.214529,10.755615&geocode=Fepo-QIdqsw1-ikRKxr5-3PqUjFkyrnG-hoqKw%3BFcLgAQMdNdTD-SnrPaX7QB4cUzGxVHu3ljJKNQ%3BFehDAgMdmrLG-Sm57VLrSyccUzGAnAe_-At1SQ%3BFeKBGwMdmK-k-Skrme1Hv_YEUzGQJneVMp4EBQ%3BFc3jCgMdi5wz-SnVP4SfA3BxUzE6tlK2sTttJg%3BFaqq7wIdOW6p-CmzT6lD8XOGVDGL84Gb6paRuw&oq=vanvouver+&mra=ls&t=m&z=6

Shout out if you are along this path and want in on it.

Ok so the Canadian leg is mapped out.

What about us US guys?
I know there was mention about having two Zippers in rotation at once, is that the plan or do we need to wait until the Canucks have use it up first?   ......Or maybe it hasn't yet been decided?
Just wondering if we US guys need to step up and map out a US route now?

Not trying to be pushy, just want to see if some action needs to be taken by those of us on the US list to try it.

You don't even have a government, and you want to get a Zipper Loaner?   

WE don't need to be GOVERNED!!! :geek: :geek: :farao: 

LMAO Bill.
Dave, when you get it, please let me know, I'll swing by, I'd like to see it in action if I could :-)

dp1 wrote:
Dave, when you get it, please let me know, I'll swing by, I'd like to see it in action if I could :-)

When I get the Zipper Loaner?....you want to see it?
Well. why wouldn't you want to try it yourself!?! :geek: 

Heck when I'm done using it you could be next on the list to try it!........I could come deliver it to you when I'm done too!  I'd rather bring it to you then ship it to the next guy. :albino: 

We would love to try the Zipper here in Omaha, Nebraska

Dustin, CAN 13&15” ??????????
Bill Soukoreff, CAN 13&15”
Foster, CAN
Roland, VA
Ryan, NC
Chip, NJ
Robert, NE
Bill & Deb, NE
Robert, CO
Davey, CA 13&15"
Demien, CA 13&15"
Talley, WA
Mike, WA
Juan, WA


Obvious as it may seem, I must post this qualifier...
It's understood anybody getting to do the Floater will buy from me if & when they buy the Zipper.
On this basis, anybody want out?

Joe Bristor wrote:


Obvious as it may seem, I must post this qualifier...
It's understood anybody getting to do the Floater will buy from me if & when they buy the Zipper.
On this basis, anybody want out?

Makes sense to me.

Let's get this show on the road!!  

Any idea when the Zipper will begin the Canadian leg of the tour?.......or has it already?

Hi Joe, is that two complete units or just different heads? If it is two machines, then I will go with whatever the other Canucks want to try.

Dustin, CAN 13&15” OK, we just sent the first floater to Dustin up in Canada.  We sent 1 complete 15" unit.  
Bill Soukoreff, CAN 13&15”  Bill, you get it after Dustin.
Foster, CAN  Not sure if Foster wants it. If so he should contact me.

We are now firming up plans for the US Floater(s).
Please state a week period that would be ideal for you to test it.

Roland, VA
Ryan, NC  WANTS IT THE FIRST WEEK OF JANUARY 2014.
Chip, NJ
Robert, NE  ANYTIME
Robert, CO
Davey, CA 13&15" ANYTIME
Demien, CA 13&15"
John Talley, WA
Mike, WA
Juan, WA SOLD

I'm good on any month...always have a large commercial each month at some point.

my AT is waiting patiently for its new friend to arrive    

Joe Bristor wrote:

We are now firming up plans for the US Floater(s).
Please state a week period that would be ideal for you to test it.

 

Actually I don't have any plans to use it on a particular job, so it really doesn't matter. I just say asap would be nice.  

How is that going to work or not, if it's going to be scheduled around guys jobs?

Joe Bristor wrote:Dustin, CAN 13&15” OK, we just sent the first floater to Dustin up in Canada.  We sent 1 complete 15" unit.  
Bill Soukoreff, CAN 13&15”  Bill, you get it after Dustin.
Foster, CAN  Not sure if Foster wants it. If so he should contact me.

We are now firming up plans for the US Floater(s).
Please state a week period that would be ideal for you to test it.

Roland, VA
Ryan, NC  WANTS IT THE FIRST WEEK OF JANUARY 2014.
Chip, NJ
Robert, NE  ANYTIME
Robert, CO
Davey, CA 13&15"
Demien, CA 13&15"
John Talley, WA
Mike, WA
Juan, WA SOLD

I have two local guys in town that will play part in demo. I hope I don't spoil it for you guys down the line. If this thing performs like promoted then I'm taking the unit out of circulation.  

Eric your one of the two by the way. So try and line up some commercial for the month of January. I will most likely be using it the first two weeks.

Thanks Ryan, I've got an account I can try it on.
I was going to PM you to say that I would like to see it in action and offer to help you on one of your jobs to see how it performs. You get a free helper, I get a demo, best of both worlds for the two of us.

according to ups it will be on my door step by tomorrow night.....