Judson TNT Refurbish

Yeah I'll do that with basket gasket  

I do have to be more careful with that nasty filter thanks for the reminder.

Were is the CFM meter? Did you give it to DP? Speaking of DP, were I she? I haven't seen him post in a while.

I have CFM meter, cause I'm still using it, and he's been on vacation.

He's back now, as of last night I think?

Haven't you had that meter for two months now? Keep it moving people are waiting.

Haha, don't think it's been two months!!  

Sorry, I haven't got a message on these "people waiting"? Besides DP being next, but was on vacation and I'm currently trying to get together with to pass it on.  

BTW who's got the second one, I was told Joe had two CFM meter floaters out there.........so someone has kept the other one?...haven't even seen that one ever in rotation?? 

Oh you were on vacation too. Yeah DP, me, and smartkleen are next. I'll talk to Joe see if he has another one.

Set my hoses and turn the switch and nothing. Asked the man I was cleaning for If he wanted me to VLM carpet did a little demo didn't look to impressed.

I ended up jumping the solenoid and it cranked right up. I started cleaning and the guy says. "That's what I liked hear, the shoot being sucked out of the carpet. It sure is nice to be able to offer both methods.

The machine started right up at the next job gotta buy a started solonoid

Sell me your machine!   

What an I going to use? I do feel like buying that 100 gallon tank from the Tractor Supply using it as my waste tank and frame for a new build


http://www.tractorsupply.com/en/store/better-built-black-steel-100-gallon-rectangular-tank

Mo, I don't know if the starter is the same for a 18hp but I have one for a 22 or 23hp Briggs. You can have it and anything else that will fit your engine. Cross reference the parts. These seem to look in good shape. Just pay shipping and have a set for backup.

Mo wrote:What an I going to use? I do feel like buying that 100 gallon tank from the Tractor Supply using it as my waste tank and frame for a new build


http://www.tractorsupply.com/en/store/better-built-black-steel-100-gallon-rectangular-tank

Are you planning on running the apo to this tank or direct linking to the TNT tank?

No I was thinking about installing the extra blower and pump on that tank.

Larry Henson wrote:Mo, I don't know if the starter is the same for a 18hp but I have one for a 22 or 23hp Briggs. You can have it and anything else that will fit your engine. Cross reference the parts. These seem to look in good shape. Just pay shipping and have a set for backup.

 Thanks Larry. I'll see if I can find some part numbers and let you know

I had quite a bit of upholstery to clean this week so I bought the ss tool.  I'm ready to roll get to the place turn the switch and nothing, went to jump the starter it cranked but didn't turn on. I have my TNT in the van with a nice upholstery tool and I end up cleaning 4 sofa with my little 3 gallon spotter. On a side note. I got this upholster job just cuz she heard me say that I would schedule her after an upholstery job that I had scheduled. It turned into a 700.00 ticket    

I tried turning it on all week and nothing except for last night it turned on. I just received a new solenoid today and installed it. I have two upholstery jobs tomorrow finger crossed

It has to be that solenoid, slap it in and be ready for an easy upholstery job.

Ummm, why aren't you try to start it now instead of waiting 'til tomorrow at the job site ? I absolutely can't stand truckmount issues, I'm not mechanical at all, I wish there's AAA for truckmount emergency service   

Dp wrote: "I wish there's AAA for truckmount emergency service"

Give it about 24 hours after you posted and I bet one pops up somewhere...it is crazy enough that it might work.

dp1 wrote:Ummm, why aren't you try to start it now instead of waiting 'til tomorrow at the job site ? I absolutely can't stand truckmount issues, I'm not mechanical at all, I wish there's AAA for truckmount emergency service   

I'm your TM AAA, but you're not going to like my membership fees for coming out to the Pasadena area!   

I started after I put the solenoid I'm just hoping that's going to resolve the issue permanently.

Dave I received the CFM meter yesterday. Thanks

I can't believe I did this but I bought a heat exchanger and a little giant 3 used sight unseen. My brother in law picked them from this guy in Hemet that is having a fire sale sale on stuff. They guy has tanks, pumps, a spinner etc.

Ill text him the lounge address to post his stuff

Mo wrote:I can't believe I did this but I bought a heat exchanger and a little giant 3 used sight unseen. My brother in law picked them from this guy in Hemet that is having a fire sale sale on stuff. They guy has tanks, pumps, a spinner etc.

Ill text him the lounge address to post his stuff

I like how you combined the "little giant 3 used" with the phrase "fire sale".....just saying.

I hope I i didn't jinx myself

Hopefully one of these heaters work

Is the relief valve missing something?

Just saw come pics relief valve not missing anything

Hot, great you finally got some heat, Mo!